Comet colloid mill uses the advantages of horizontal direct connection structure?
Design and Construction: Comet Colloidal Grinding Equipment Comet colloid mill, horizontal direct connection structure, high precision spindle, long running time, can not cause shaft deformation and eccentricity, modular design of internal structure, and convenient disassembly and replacement. Friction shaft high shear colloid mill, long running time, not easy to cause eccentric shaft, easy to replace, the general body of the product can operate.
And it is very inconvenient to replace the corresponding belt bundles and belt pulleys with imported colloid milled funnels. It is a kind of laborious manual work. Let's talk about them with double mechanical seals. Everyone knows that Cartridge-type mechanical seal device is a negative pressure method. If the discharge port is blocked, the pressure in the inner cavity of the imported colloid mill will suddenly rise and leak failure will occur. Professional technicians are required to replace it.
Mechanical seal: Comet colloid mill adopts single cooling mechanical seal. Double cooling mechanical seal and improved type will never damage the shaft seal structure. The user chooses colloid mill mechanical seal to have a large space, easy to clean, reduce leakage, and can run for 24 hours. , In particular, our company invented the technology of water-pumped pump shaft mechanical seal device, improved pipeline grinding pump - online colloid mill can run 10000000 hours, so never change. In addition, the single-cooled type under normal circumstances, we use positive pressure mechanical seal can withstand 20 ~ 30bar pressure, according to the pressure of the mechanical seal is generally higher than the pressure of the sealed cavity 1-2 times the pressure, which is decided Our inlet pressure can reach 15-20bar.
Product effect: energy saving and environmental protection, fine particle size, online operation, high automation, and continuous operation.
Product features: compact design, easy operation, small size, low noise, good sealing, fast heat dissipation and high precision.
Haoxing CN.HAOSTAR grinding pump - pipeline colloid mill equipment grinding pump can be selected according to the user's industrial design requirements of the container: the following describes the modified silica and titanium dioxide slurry has a special surface structure (with surface hydroxyl And adsorption of water), special particle morphology (small particles, large specific surface area, etc.) and unique physical and chemical properties, are widely used in many fields of rubber, plastics, coatings, pharmaceuticals, and household chemicals. However, due to the internal of silica The active silanol groups and their adsorbed water present on the polysiloxane and the external surface make it hydrophilic, difficult to wet and disperse in the organic phase, and due to the presence of hydroxyl groups on the surface, the surface energy is large, and the aggregate aggregate tends to be In the agglomeration, as well as active coating, dispersive depolymerization, stirring pulping, crushing and grinding, will be conducive to the next sanding, spray drying to packaging products. Introduce the performance of the modified white carbon black and titanium dioxide pipeline colloid mill (abrasive pump) pipe mill as follows:
